Operating The System; Initial Startup - Froling S3 Turbo Operating Instructions Manual

3

Operating the system

3.1 Initial startup

Page 16
B0610008
Optimum efficiency and efficient, low-emission operation
can only be guaranteed if the system is set up by trained
professionals and observing the standard factory settings.
Take the following precautions:
Initial startup should be carried out with an authorised installer or with
Fröling customer services.
If condensation escapes during the initial heatup phase, this does not
indicate a fault.
If this occurs, clean up using a cleaning rag.
Heating up the boiler too rapidly on initial startup!
Possible damage to the equipment!
If the output during the heating-up process is too great, the combustion
chamber may be damaged as a result of drying out too rapidly!
Drying fissures, on the other hand, are normal and do not indicate a
malfunction.
During initial startup of the boiler:
Place 1 piece of wood diagonally (1) across the combustion
chamber
Load the boiler with a small amount of firewood (max. 10-20% of the fuel
loading chamber)
Ignite it and allow it to burn up with the central pre-heating chamber door
open
Operating the system
N O T I C E
N O T I C E
C A U T I O N
Initial startup
I