Inspection, Cleaning And Self Maintenance; Daily Maintenance / Each Time Before Heating Up; Cleaning The Heat Exchanger Pipes (For Boiler With Wos System); Weekly Maintenance - Froling S3 Turbo Operating Instructions Manual

Boiler servicing
Inspection, cleaning and maintenance

4.2 Inspection, cleaning and self maintenance

4.2.1 Daily maintenance / Each time before heating up

Cleaning the heat exchanger pipes (for boiler with WOS system)

4.2.2 Weekly maintenance

Removing ash

Cleaning the passage to the side of the combustion chamber

Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestrasse 12, A-4710 Grieskirchen
Tel +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600
Regular cleaning of the boiler extends its life and is a basic
requirement for smooth running.
So clean the boiler regularly!
Recommended: When cleaning, use an ash vacuum.
Move the lever of the cleaning system
several times before the heating-up
process (5-10 times up and down)
Open the insulated door and the pre-
heating chamber door
Using the ash scraper, scrape the ash
located above the combustion
chamber into the combustion chamber
Open the combustion chamber door
Remove the ash using the rounded
ash shovel
Shovel the ash into container provided
Fire-proof container with cover!
Open the insulated door and the
combustion chamber door
Check the passage to the left and
right of the combustion chamber for
ash deposits
The amount of ash will depend on the
type of fuel used!
Clean the passages with a small brush
and remove any fallen ash
info@froeling.com www.froeling.com
4
Page 21
B0610008