Connecting To The Alarm Port; Figure 14: Alarm Port (D-15) Pin-Out - Edge-Core ECS4810-12M Installation Manual

| Installing the Switch
C 2
HAPTER

Connecting to the Alarm Port

The serial port's configuration requirements are as follows:
Default Baud rate—115,200 bps
◆
Character Size—8 Characters
◆
Parity—None
◆
Stop bit—One
◆
Data bits—8
◆
Flow control—none
◆
C
ONNECTING TO THE
The DB-15 alarm port on the switch's front panel is used to provide external
customer site alarm inputs. The pin assignments used to connect to the alarm
port are provided in the following table.

Figure 14: Alarm Port (D-15) Pin-Out

A P
LARM ORT
15
– 42 –
1