Table 1: System Status LEDs (Continued)
LED
Condition
PWR
Green
Off
Table 2: 1000 Mbps Port Status LEDs (1~12)
LED
Condition
(1~12)
On/Flashing Green
On/Flashing Amber
Off
Table 3: SFP Present Status LEDs (1~12)
LED
Condition
(1~12)
On Green
Off
Status
DC or AC power is functioning normally.
External power not connected or has failed.
Status
Port has established a valid 1000 Mbps network
connection. Flashing indicates activity.
Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
There is no valid link on the port.
Status
The switch has detected an SFP with a valid link in
this port, the corresponding RJ-45 port will be
disabled.
There is no SFP present.
– 29 –
| Introduction
C
1
HAPTER
Description of Hardware