Configuration - Planet RT-101 User Manual

2
C
ONFIGURATION
Using the configuration software included with the RT-101,
you set the parameters necessary for Office to Internet
operation such as local and remote IP addresses, Net Masks
and telephone numbers. Prior to starting the configuration
process, ensure that you have a DEC VT52/VT100
compatible communication program.
1. With the RT-101 powered Off, connect the RT-101
using the packaged configuration serial cable.
2. Set both of the RT-101's DIP switches to their On
positions. See the Dip Switches table in Chapter 1
for more information.
3. Configure your DEC VT100 or DEC VT102
compatible communications program. If needed
consult the communication programs manual and
ensure that the following parameters are set:
•
•
•
•
•
•
4. Power On the RT-101 by plugging in the power
adapter.
automatically initiate.
5. Configure the RT-101 as described below.
serial port directly to your PC
VT100
19200bps
8-bit data
no parity
1 stop bit
Software (XON/XOFF) flow control
The

configuration

serial port
program will