Feature
Œ Power port
• 10Base-T port
Ž 10Base2 port
•
Serial Port
•
DIP switches Used to put the RT-101 in the
'
Error LED
'
Link LED
Description
Connect the power adapter to this
port.
Connect 10Base-T cabling to this
port.
Connect 10Base2 cabling to this
port.
Connect the modem to this
port.
configuration mode.
more information, refer to DIP
Switches table below.
This LED is used to indicate an
error.
However, during
power On it is normal for this
LED to light. For more
information, see the following
LED Status Table.
This LED should be on during
normal operation.
information, see the following
LED Status Table.
For
For more
9