Table of Contents
Advertisement
RT-101 User's Manual
Warning: Do not attempt to connect more than one
3. Connect Modem & Phone Line
Connect the modem, using a standard serial cable, to
the
telephone line from an RJ-11 style phone jack to the
modem.
4. Connect Power Adapter
Connect the modem
modem and the RT-101's power adapter to the RT-
101. Power both devices On.
Warning: Only use the power adapter provided with the
5. Check the LEDs
When the RT-101 is powered On, both LEDs should
light, then the Error LED should go off.
LED stays on, there is a hardware problem.
Consult your dealer.
LEDs, refer to the LED Status Table in Chapter 1.
26
type of cable at the same time or change the
network cable while the RT-101 is powered
On.
RT-101's
serial
RT-101. Using a different one may cause
hardware damage.
port.
Next,
power adapter to the
For more information on the
connect
a
If the Error
Advertisement
Table of Contents
