Table of Contents
Advertisement
RT-101 User's Manual
Serial Port
22
The following options allow you to set the
parameters that define how the serial
interface is configured for data transmission.
UPD Checksum:
Set this option to Yes to enable
UDP Checksum. UDP Checksum
provides a check on all transmission
data to ensure data reliability. When
the UDP Checksum function is set
to No, the device ignores UDP
checksum on incoming packets and
uses zero checksum on out going
packets.
Periodic RIP:
Select this option to allow the RT-
101 to pass periodic RIP (routing
information) packets across the
WAN interface. The default setting
is Yes; however, when unnecessary
this increases the traffic on the
WAN link. Before changing this
setting ensure that the ISP
router does not RIP updates.
Generate Zero Fill (BSD 4.2)
Broadcast Address:
This
option
compatibility with those networks
which have early implementations
based on UNIX BSD4.2. Setting this
option to Yes will cause all outgoing
broadcast
translated
addresses.
Use Ethernet IP Address and
Network Mask:
Set this option to Yes to use the
is
provided
IP
addresses
into
Zero
for
to
be
Fill
type
Advertisement
Table of Contents
