Adding An Audio Call - Polycom VIEWSTATION Training Manual

End-User Training Guide: ViewStation

Adding an Audio Call

This function requires a dedicated analog telephone circuit.
Audio Add-On icon.
Placing the Call
Call Hangup Choices Screen.
Telephone Screen
On your main menu you will have an Audio Add-on icon
(graphic left). By selecting this icon you are taken to the
dialing screen where you will enter the desired telephone
number of the audio participant(s).
VSGi - Polycom ViewStation End-user Training Guide
1. Wait until the video call has
connected.
1. Press CALL•HANG-UP button
on the Remote. This will take
you to the Call Hangup Choices
Screen.
2. Use the arrow buttons to
highlight ADD
SPEAKERPHONE CALL. Press
the SELECT button. This will
take you to the Telephone
Screen.
3. Enter numbers using the keypad
on the Remote.
4. Press the SELECT button to
place the call.
5. After the call connects, press the
NEAR or FAR key to return to
the videoconference.
For more
information
call
408-402-9000
9