Oce ColorWave 300 User Manual page 69

Open the 'Scan' tab with the confirmation button above the scroll wheel.
3.
Use the scroll wheel to select scan template 3 ('Scan to USB').
4.
Note:
With a scan template you can pre-define the settings you need for a scan job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see
scan templates' on page
'Insert USB device'.
5.
Press the start button.
6.
After the scan procedure the scanner always holds the original. You can release the original
if you select 'Release paper' on the user panel.
Result
The system creates a sub-directory "scans_x" on the USB mass storage device and stores
the scanned file in this sub-directory in JPEG format.
122).
Scan to a USB mass storage device
'Define the scan job preferences and
Chapter 3 - Quick start 69