Oce ColorWave 300 User Manual page 61

Make a normal color copy
Note:
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see 'Define the copy job preferences and
copy templates' on page 116).
Press the start button.
4.
After the scan procedure the scanner always holds the original. You can release the original
if you select 'Release paper' on the user panel.
Chapter 3 - Quick start 61