#
The 'X offset'
Open a template with the confirmation button.
Scroll to 'Delete area' and open this setting with the confirmation button.
Scroll to 'X offset', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Y offset', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Width', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Length', define the value with the scroll wheel or numeric keys and confirm.
Press 'OK'
Define the number of copies and press the start button.
4.
Result
The Océ ColorWave 300 copies an original without the specified area.
Make a copy and delete a specific area of an original
The 'Y offset'
Chapter 5 - Use the Océ ColorWave 300 multifunction printer
The 'Width'
The 'Length'
193