The 'Leading' strip
Open a template with the confirmation button.
Scroll to 'Remove strip' and open this setting with the confirmation button.
Scroll to 'Leading', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Trailing', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Left', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Right', define the value with the scroll wheel or numeric keys and confirm.
Press 'OK'
Scroll to 'Alignment' and open this setting with the confirmation button.
Scroll to 'Alignment', select 'Center' with the scroll wheel and confirm.
Define the number of copies and press the start button.
4.
Note:
You can use the 'Alignment''Shift horizontal' and 'Shift vertical' to adjust the defined
position of the specified area.
Result
The Océ ColorWave 300 copies a specific area of the original to the specified position
on the copy.
The 'Trailing' strip
Chapter 5 - Use the Océ ColorWave 300 multifunction printer
Make a copy of a specific area of an original
The 'Left' strip
The 'Right' strip
191