Oce ColorWave 300 User Manual page 108

Define the system preferences
Settings group
'Regional settings'
'Print queue management'
'Smart Inbox management'
'Logging and accounting'
'Printer properties'
'Scanner properties'
'Stamps 1 to 4'
'Stamps 5 to 8'
'Stamps 9 to 12'
Click 'Edit' in the settings group bar or click the value of a single setting.
2.
(see 'How to edit a setting' on page
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
3.
108 Chapter 4 - Define your workflow with the Océ Express WebTools
Description
The regional settings are configured during the
installation of your system. Here you can change
the initial configuration.
Note:
You can toggle between the 'First lan-
guage' and the 'Second language' on the
user panel.
Note:
Every time you change the 'Measurement
unit', the controller recalculates the values
from millimeter to inches and vice versa.
If you reverse to the original value of this
setting a slight calculation difference can
occur due to rounding differences.
Define how jobs are managed in the print queue.
Define how jobs are managed in the Smart Inbox-
es.
Define logging and accounting data.
Define the general printer behavior.
Define the general scanner behavior. Only available
if a scanner is installed.
Configure and enable stamps for copy jobs.
Configure and enable stamps for copy jobs.
Configure and enable stamps for copy jobs.
86)