Do not use an exhaust hood with a magnetic latch.
venting can cause moisture and lint to collect
may result in:
 Moisture damage to woodwork,
furniture, paint, wallpaper,
problems and health problems.
Choose your exhaust installation type
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
E Rigid metal or flexible metal vent
G. Vent length necessary to connect
D, Exhaust hood
H. Exhaust outlet
Optional exhaust installations
Venting systems come in many varieties. Select the type best for
Cover unused exhaust
hole with the following
Contact your local dealer.
Failure to follow these instructions can result in death,
shock, or serious injury.
A. Standard rear offset exhaust installation
B. Rear exhaust installation to left or right side
c. Bottom exhaust installation
D. Over-the-top installation (alsoavailable with one
NOTE: The following kits for alternate installations are available
for purchase. For further information, please call
Rear exhaust installation to left or right side:
Part Number 8212504
Bottom exhaust installation:
Part Number 8212503
Part Number 26-49900
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
This dryer can be converted to exhaust out the bottom. If you
prefer, you may contact your local dealer to have the dryer
converted. This dryer can also be exhausted from the rear to
either the right or left side. Optional kits for these exhaust
installations are needed. Refer to the manufacturer's
for kit installation instructions.