Replacing The Microphone - Packard Bell EasyNote NM85 Service Manual

Replacing the microphone

88
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
2 M2.5×6 black (palm rest - top side)
•
in step 13 of the
•
Indicated by B in
page 49
•
2 black M2.5×4 (LCD front panel)
•
To replace the microphone:
1
Complete the steps in
2
Remove the LCD panel assembly by performing steps
"Replacing the LCD panel assembly"
3
Remove the LCD front panel by performing steps
LCD front panel"
4
Remove the LCD panel by performing steps
panel" procedure on
5
Release the microphone cable from the adhesive tabs securing them, and
then remove the microphone from the LCD assembly lid.
or Non-marring plastic scribe
6 M2×3 black (palm rest - base side) - Indicated by A
"Replacing the palm rest"
9 black M2.5×6 (palm rest - base side) -
step 13 of the "Replacing the palm rest"
6 chrome M2.5×4 (LCD panel)
"Preparing the notebook" on page
procedure on page 79.
page 83.
procedure on page 49
37.
2–15
procedure on page 61.
3–5 of the
4–6 of the "Replacing the LCD
procedure on
of the
"Replacing the