Replacing the hard drive
40
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
•
1 black M2×3 (hard drive)
•
2 chrome M3×4 (hard drive bracket)
To replace the hard drive:
1
Complete the steps in
2
Complete the steps in
3
Remove the hard drive screw.
4
Grasp the black mylar tab and use it to disengage the hard drive from its connector,
and then remove the drive from its compartment.
Non-marring plastic scribe
"Preparing the notebook" on page
"Removing the bay cover" on page
37.
39.