Packard Bell EasyNote NM85 Service Manual page 83

5
Remove the old processor from the system board (2).
Discrete model
6
Align pin 1 of the new processor (indicated by the gold arrow on the corner
of the processor) with the beveled corner of the processor socket.
Discrete model
The processor will easily fit into the socket if you oriented it properly.
7
Use a flat-blade screwdriver to turn the lock screw 180° clockwise to secure
the processor in place.
8
Apply just enough thermal grease to evenly coat the surface of the processor
die.
9
Reinstall the cooling assembly by performing steps
the cooling assembly"
10
Reinstall the system board by performing steps
the system board"
11
Reconnect the USB board and Bluetooth module cables to their system
board connectors.
12
Reinstall the Bluetooth module by performing step
Bluetooth module"
13
Reinstall the USB board by performing steps
USB board"
14
Reinstall the LCD panel assembly by following the steps
"Replacing the LCD panel assembly"
www.packardbell.com
procedure on
procedure on
procedure on
procedure on page 65.
UMA model
UMA model
8–11
page 73.
20 and
page 69.
11
page 67.
10–11 of the
procedure on page
of the "Replacing
21 of the "Replacing
of the "Replacing the
"Replacing the
16–26 of the
61.
77