Set Time - Link4 iGrow 100 Series Installation And User Manual

Set Time

The time on the system clock can be adjusted by highlighting a chosen field (Button #1,
#2, #3) and using the Wheel to modify the field value. If a given field is already highlighted
repressing that button causes the value in that field to be increased.
12H/24H: Used to set the time display as 24 hr/12 hr duration.
Set Hour: Used to highlight the hour field.
Set Min(X0): Used to highlight the tens place of minutes value.
Set Min(0X) :Used to highlight the single place of minutes value.
AM/PM: Used to set AM/PM value.
Note that when the clock is set to 24H, the AM/PM button increments the time by 12
hours.
72 iGrow Series 100 Manual