Link4 iGrow 100 Series Installation And User Manual page 12

3. The iGrow Series 100™ comes with a 12V DC wall mount power supply. Make sure
there is a power outlet within approximately 6 feet. It is recommended that the
outlet is not switched and is on a circuit that is independent of any noisy, high power
equipment. The use of a sealed outlet is recommended if the power output is ex-
posed to moisture.
4. Identify what type of surface you will be mounting the iGrow Series 100™ to. In-
cluded are 4 self-drilling screws for mounting to beam or wood panel.
5. There are 4 mounting points on the inside of the iGrow Series 100. Using the appro-
priate tools depending on your surface, mount the iGrow Series 100™. Refer to the
figure below (2.1) for a visual picture.
Figure 2.1 iGrow Series 100™ Installation Instructions
iGrow Series 100 Manual 11