Link4 iGrow 100 Series Installation And User Manual page 26

to go to Deadband. Wheel can be used to increase or decrease the corresponding value.
iGrow Series 100 Manual
Button #8 toggles between Basic
and Advanced setpoint menus.
Ramp (in minutes) enables a gradual
temperature transition from one
setpoint to the next. Button #6 can
be used to go to Ramp option
Deadband creates a hysteresis in
switch temperature which prevents
the adjacent stages to oscillate back
and forth from small temperature
fluctuations. Button #7 can be used
Press the Back button to navigate
back to the Temp Setpoints screen
and set the NIGHT setpoint.
By default the Night and DIF set-
points are set to OFF.
Pressing Button #1 will let the user
to turn this parameter On or Off.
25