Link4 iGrow 100 Series Installation And User Manual page 46

iGrow Series 100 Manual
On selecting a vent the user needs to
do the set up of the following:
• Open to Close time
• Overrides
To highlight the sub options use
wheel or Buttons #1 and #2 and OK
to select the options
The Vent Open- Close Time is the
time in minutes and seconds that
it takes for the vent to go from full
closed to full open position and vice
versa.
On selecting the Set Open-Close Du-
ration the following screen comes
up.
By pressing Button #1 user can to go
Set Open/Close time duration op-
tion.
The screen enables to set the Open-
Close Duration.
Buttons (#2, #3, #4) are used to
highlight the fields and the Wheel
is used to increment and decrement
the field values.
Note: To determine the vent open-
close time turn the manual toggle
switch on and use a clock or stop-
watch to time the vent as it goes
from its fully closed to open position.
45