Link4 iGrow 100 Series Installation And User Manual page 49

By pressing Button #7 user can to go to % covered option. Wheel can be used to increase
or decrease the value
will correctly calculated only if the location coordinates are entered correctly.
48
Shock Protection: Selecting a shock
protection mode helps in opening
the curtain slowly,preventing it to
open all at once and thus preventing
sudden temperature changes .
Press Button #2 to go to night mode
setup option. Then, press Button #6
to go to this option
Note: Covered % is the amount by
which the curtain should be covered.
The day mode and the night mode
start time can be set to an absolute
value using the screen as shown or
to a the sunrise and sunset values.
Location setup can be used to input
the coordinates
Press Button #5 and OK to confirm.
Then user can change the time by
pressing Buttons #1,#2,#3,#5,#6.
Note: The sunrise and sunset values
Any one of the available 8 channels
can be selected to be an alarm out-
put.
Set Temperature: This Tab lets you
select the temperature threshold
above or below which the alarm will
be triggered.
iGrow Series 100 Manual