Link4 iGrow 100 Series Installation And User Manual page 52

To enable a precise measured calcu-
lation of the electrical consumption,
select Measured and press OK.
Note: A confirmation popup comes
up indicating the change in setup as
shown.
The Voltage Phase, amperes(Amps)
and the Power Factor(PF) values are
entered by pressing Buttons #1 - #4
and using the Wheel to modify the
values.
Using the above values the kW value
is calculated.
To enable a rough/approximate cal-
culation of the electrical consump-
tion , the estimated setup is select-
ed.
iGrow Series 100 Manual 51