Link4 iGrow 100 Series Installation And User Manual page 104

means no particular action is taken with that equipment in the humidify stage.
3.1.1.3.2.2.2.
When the zones humidity goes above the high humidity setpoint, this engages the dehu-
midification stage.
Equipment programmed at the controller can be activated or de-activated, as desired,
when this stage is triggered. Another option for each piece of equipment is N/A, which
means no particular action is taken with that equipment in the humidify stage.
3.1.1.3.2.2.3.
When the zones humidity goes above the high humidity setpoint and the outdoor tem-
perature goes below xx deg, the "Cold De-humidification" stage is engaged. Equipment
programmed at the controller can be activated or de-activated, as desired, when this
stage is triggered. Another option for each piece of equipment is N/A, which means no
particular action is taken with that equipment in this stage.
3.2.
This option lets you label and store your program in either the internal memory of the
iGrow, to a USB drive (jump drive), and/or an SD card. You may have programs for dif-
ferent crops or for different seasons of the year. This will be a convenient way of storing
your programs with the capability to restore the program whenever desired.
3.2.1.
Pressing the Save Configuration key will bring up the save to option. Clearly, if you are
going to save to a USB drive or an SD card you will need to have placed either of these
devices inside your iGrow. After making you selection you will be given the option of
labeling the file with up to nine alphanumeric.
3.2.2.
Pressing this key will bring up the "restore from.." option. You must select one of the
three options from which to extract the file. The file you select will then replace the one
you currently are using.
3.2.3.
Pressing this key will bring up the "delete from" option. You must select one of the op-
tions from which to remove the file. The file will then be permanently deleted.
3.3.
iGrow Series 100 Manual
De-Humidify
De-Humidify (Cold)
Save/Restore
Save Configuration
Restore Configuration
Delete Configuration
Sensor Setup
103