Igmp Filtering Profile - ZyXEL Communications XGS-4728F User Manual

Table 63 Advanced Application > Multicast > Multicast Setting > IGMP Snooping
VLAN (continued)
LABEL
VID
Add
Cancel
Clear
Index
Name
VID
Delete
Cancel

24.5 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients
connected to the Switch are able to join. A profile contains a range of multicast IP
addresses which you want clients to be able to join. Profiles are assigned to ports
(in the Multicast Setting screen). Clients connected to those ports are then able
to join the multicast groups specified in the profile. Each port can be assigned a
single profile. A profile can be assigned to multiple ports.
XGS-4728F User's Guide
DESCRIPTION
Enter the ID of a static VLAN; the valid range is between 1 and 4094.
Note: You cannot configure the same VLAN ID as in the MVR
screen.
Click Add to insert the entry in the summary table below and save your
changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click this to clear the fields.
This is the number of the IGMP snooping VLAN entry in the table.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Check the rule(s) that you want to remove in the Delete column, then
click the Delete button.
Click Cancel to clear the Delete check boxes.
Chapter 24 Multicast
205