ZyXEL Communications XGS-4728F User Manual page 76

Chapter 7 System Status and Port Statistics
Table 10 Status > Port Details (continued)
LABEL
Status
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packets
Multicast
Broadcast
Pause
Tagged
Rx Packet
The following fields display detailed information about packets received.
RX Packets This field shows the number of good packets (unicast, multicast and
Multicast
Broadcast
Pause
Control
TX Collision
The following fields display information on collisions while transmitting.
Single
Multiple
Excessive
Late
76
DESCRIPTION
If STP (Spanning Tree Protocol) is enabled, this field displays the STP
state of the port (see Section 13.1.3 on page 127
If STP is disabled, this field displays FORWARDING if the link is up,
otherwise, it displays STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the transmission speed of data sent on this port in
kilobytes per second.
This field shows the transmission speed of data received on this port in
kilobytes per second.
This field shows the total amount of time the connection has been up.
This field shows the number of good packets (unicast, multicast and
broadcast) transmitted.
This field shows the number of good multicast packets transmitted.
This field shows the number of good broadcast packets transmitted.
This field shows the number of 802.3x Pause packets transmitted.
This field shows the number of packets with VLAN tags transmitted.
broadcast) received.
This field shows the number of good multicast packets received.
This field shows the number of good broadcast packets received.
This field shows the number of 802.3x Pause packets received.
This field shows the number of control packets received (including those
with CRC error) but it does not include the 802.3x Pause packets.
This is a count of successfully transmitted packets for which transmission
is inhibited by exactly one collision.
This is a count of successfully transmitted packets for which transmission
was inhibited by more than one collision.
This is a count of packets for which transmission failed due to excessive
collisions. Excessive collision is defined as the number of maximum
collisions before the retransmission count is reset.
This is the number of times a late collision is detected, that is, after 512
bits of the packets have already been transmitted.
for more information).
XGS-4728F User's Guide