SMART Board SB685ix2 User Manual page 29

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
DHCP Displays the status of the
network's Dynamic Host
Configuration Protocol (DHCP)
as On or Off.
Password E-mails the network password
Reminder to the previously defined e-mail
recipient.
IP Address Displays the projector's current
IP address in values between
0.0.0.0 and 255.255.255.255.
Subnet Mask Displays the projector's subnet
mask number in values between
0.0.0.0 and 255.255.255.255.
Gateway Displays the projector's default
network gateway in values
between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector's primary
domain name server (DNS) IP
address in values between
0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector's MAC
address in xx-xx-xx-xx-xx-xx
format.
Group Name Displays the projector's
workgroup name as set by an
administrator (maximum 12
characters).
19 smarttech.com/kb/170510
Notes
The default is on.
On enables a DHCP server on the network to
automatically assign an IP address to the
projector.
Off enables an administrator to assign an IP
address manually.
See Web page management on page 47 to set
up a destination e-mail address.
To change the projector's IP address, use the
RS-232 connector (see Network controls on
page 68) or use a DHCP server to assign a
dynamic IP address, and then set a static IP
address using the network remote
management feature (see Remotely managing
your system through a network interface on
page 47).
You can set the projector's workgroup name
using the remote management features (see
Remotely managing your system through a
network interface on page 47 and Remotely
managing your system through an RS-232
serial interface on page 57).