SMART Board SB685ix2 User Manual page 28

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
Startup Screen Selects the type of startup
screen (SMART, Capture User
Startup Screen, Preview
Startup Screen), or Image
Alignment Screen.
Image Alignment Enables you to adjust the
Screen projected image size, shape and
location.
Set to Default? Resets projector settings to
their default values.
Opens a sub-menu that enables
USB Source
you to select the video input on
Select
your projector and the USB
receptacle on the ECP (if
present).
Network menu
Network Activates the projector's RJ45
connector and network features.
Status Displays the current network
status (Connected,
Disconnected or Off).
18 smarttech.com/kb/170510
Notes
This screen displays when the projector lamp
is starting and a video source signal isn't
displayed.
SMART displays the default SMART logo on a
blue background.
Capture User Startup Screen closes the
on-screen display menu and captures the
entire projected image. The captured image is
displayed the next time the on-screen display
opens. (The capture can take up to one
minute, depending on the complexity of the
background graphic.)
Preview Startup Screen enables you to
preview the default or captured startup screen.
Image Alignment Screen enables you to
adjust the projected image size, shape and
location.
The image alignment screen appears the first
time you start your projector. However, you
can access it from the startup screen menu
any time. Press Menu or Enter to close it.
If you select Yes, all projector settings reset to
their defaults, reversing any menu changes
you made. This action is irreversible.
Don't adjust this setting unless you want to
reset all of the applied settings, or unless
you're advised to by a SMART Support
specialist.
The defaults are as follows:
HDMI 1, USB 1
l
HDMI 2, Disabled (no associated USB
l
input)
VGA 1, USB 2
l
The default is off.