SMART Board SB685ix2 User Manual page 77

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
Usable command by Property
power state
Standby / On
idle
get resolution
set or get highspeedfan
get get failurelog
get gett error#
set set restoredefaults
set set factoryreset
67 smarttech.com/kb/170510
Valid values
last known video input
resolution in the format of
###x###@##Hz or ###i/p
• high
• normal (default)
Returns a text list of
failures detected by the
projector and logged in
the projector's failure log
(or an indication of
"normal"). This is in the
format of failure1, failure2,
failure3, etc.
Returns text information
about the specified error
number in the projector's
error log.
• true
• false
Notes
Enables the high speed fan
in hot environments to
prevent overheating.
Failures detectable by the
projector include the
following: overtemp, fanlock,
fanDMD, fanblower,
fansystem, lamperror,
colorwheelbreak, lampignite,
lampoverheat, lampdriver,
lampoverhours
Reported data: Error type,
lamp hours, system hours,
system temperature, and
lamp voltage when the error
was detected.
This immediately reset the
projector operating
parameters to their factory
default settings. A hard
power-cycle may be required
to complete.
Setting this to "true" resets
the projector operating
parameters to their factory
default settings. A hard
power-cycle may be required
to complete.