Related Manuals for Arecont Vision megadome
Summary of Contents for Arecont Vision megadome
- Page 1 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 Arecont Vision MegaDome Installation Manual www.arecontvision.com P a g e...
- Page 2 Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 MegaDome™ Installation Manual Inside the box: A. Arecont Vision MegaDome B. Mounting template C. Magnetic core D. Pack of four (4) wood screws and four (4) dry wall anchors E. One double sided hex key F.
- Page 3 Using the Mounting template, prepare the mounting surface. NOTE: the 19.5mm diameter hole on the Mounting template is where the Ethernet cable will be exiting the MegaDome , align accordingly. If using the side conduit hole, please see step 9 below.
- Page 4 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 Align the holes in the camera with the prepared holes on the mounting surface. Attach the camera to the mounting surface with the wood screws. Image 4 Image 5 Install the included magnetic core onto the Ethernet cable as shown in Image 4.
- Page 5 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 If you are using the side conduit opening, remove the conduit plug by first removing the Allen set screw using the appropriate provided Allen key (Image 6). Adjusting the Tilt, Pan and Focus: 10.
- Page 6 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 Image 9 15. To focus the lens, loosen the three set screws as shown in Image 9 and adjust each as needed. A adjusts the varifocal, B adjusts the iris, C adjusts the focus. 16.
- Page 7 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 MegaDome™ Pendant Installation Instructions Inside the box: A. Top shield B. Pendant Mount C. Mounting template D. Pack of four (4) machine screws E. Pack of four (4) wood screws and four (4) dry wall anchors F.
- Page 8 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 18. Remove Pendant Mount and hardware from the box. Image 11 Image 12 19. Using the Mounting template, prepare the mounting surface. 20. Place small gasket onto pendant dome as shown on Image 11. 21.
- Page 9 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 MegaDome™ Wall Mount Installation Instructions Inside the box: A. Top shield and Wall mount B. Mounting template C. Pack of four (4) machine screws D. Pack of four (4) wood screws and four (4) dry wall anchors E.
- Page 10 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 26. Remove Wall Mount and hardware from the box. Image 14 27. Using the Mounting template, prepare the mounting surface. 28. Install large round rubber gasket onto Pendant as shown on Image 14. Be sure to align the holes appropriately.
- Page 11 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: +1.818.937.0700 Fax: +1.818.937.0464 This page intentionally left blank www.arecontvision.com 11 | P a g e...
- Page 12 425 E. Colorado St., 7th Floor 425 E. Colorado St., 7th Floor Glendale, CA 91205 Phone: Phone: +1.818.937.0700 Fax: +1.818.937.0464 Arecont Vision, LLC 425 E. Colorado St., 7 425 E. Colorado St., 7 Floor Glendale, CA 91205 support@arecontvision.com support@arecontvision.com www.arecontvision.com +1 (818) 937-0700 (877) CAMERA.8...
Need help?
Do you have a question about the megadome and is the answer not in the manual?
Questions and answers