Setting Up The Pressure Washer; Connections - Nilfisk-ALTO Poseidon PE Operating Instructions Manual

POSEIDON PE
3 Before starting the pressure washer
3.1 Setting up the pressure
washer (does not apply
to POSEIDON 2-35 PE /
POSEIDON 3-39 PE)
4 Operation and use
4.1

Connections

4.1.1 Connecting the lance to
the spray gun
8
1. Before using the pressure
2. In the event of any damage
3. Check whether the oil level
1. Pull the blue quick-release
A
2. Insert the nipple of the spray
B
3. Pull forward the spray lance
NOTE!
Always remove any dirt from
the nipple before connecting
the lanse to the spray gun.
washer for the fi rst time,
check it carefully to detect
any faults or damage.
contact your Nilfi sk-ALTO
dealer immediately.
is in the middle of the oil
inspection glass, oil cup or
dip stick. This also applies to
machines with gear.
grip (A) of the spray handle
backwards.
lance (B) into the quick-
release connection and
release it.
or any other accessory to
ensure correct mounting
before starting the machine.
Original Instructions