Nilfisk-ALTO Poseidon PE Operating Instructions Manual page 6

POSEIDON PE
CAUTION!
High pressure hoses, fi ttings
and couplings are important
for the safety of the washer.
Use only high pressure parts
approved by the manufacturer!
Failure to observe these
instructions can endanger your
safety.
Please contact the Nilfi sk-
ALTO service department or an
authorised specialist work-shop
for all other maintenance or
repair work!
Testing
The cleaner conforms to
the German „Guidelines for
Liquid Spray Jet Devices".
The high-pressure cleaner
must be subjected to a safety
6
examination in accordance
with the „Accident Prevention
Regulations for Working with
Liquid Spray Jet Devices" as
required, but at least every
12 months, by an authorised
inspector and this report must
be saved.
The complete „Accident
Prevention Regulations for
Working with Liquid Spray Jet
Devices" are available from
the Carl Heymanns Verlag
KG, Luxemburger Strasse
449, 50939 Cologne or from
the appropriate association of
employers' liability insurances.
Unloader valve
Unacceptably high pressure
is fed back without residual
pressure via a bypass line into
the intake line of the pump
when the safety device is
tripped.
The unloader valve is set and
sealed at the factory and must
not be adjusted.
Safety device
Locking device on spray gun:
The spray gun features a
locking device. When the pawl
is activated, the spray gun
cannot be ope rated.
O
Original Instructions