Table of Contents
Advertisement
3 Before you start using your
pressure washer
3.1 Mounting of wheels
(only models including
wheels)
3.2 Mounting of trolley
handle (models with
trolley handle)
3.3 Mounting of quick
coupling
1. Mount the wheels by press-
ing them into the cabinet.
1. Remove the label on top of
machine.
2. Place the trolley handle (12)
into the machine.
3. Secure the handle by tighte-
ning the 4 screws.
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.
Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.
EN
5
Hide quick links:
Advertisement
Table of Contents
