Appendix A • Specifications, Part Numbers, And Accessories; Audio Input - Extron electronics mlp 101 series User Manual

Specifications, Part Numbers, and Accessories
Specifications
Audio
Gain ................................................ Adjustable, +25 dB to + 72 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.1 dB
THD + Noise (with a 10 Hz to 80 kHz bandwidth filter)
S/N ................................................. 92 dB at maximum output (unweighted,
CMRR .............................................. >70 dB @ 20 Hz to 20 kHz
Low cut filter .................................. 75 Hz (18 dB per octave)
Equivalent input noise ................. <126 dBV (unweighted, with a 10 Hz to

Audio input

Number/signal type .................... 1 mono, balanced
Connectors
MLP 101 .............................. (1) 3.5 mm captive screw connector, 3 pole
MLP 101 AAP, MLP 101 D (1) female 3-pin XLR
Impedance ..................................... 2k ohm balanced
Nominal level ................................ -60 dBV or -48 dBV
Maximum level ............................. -1.5 dBu, (balanced) at 1% THD+N
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type .................... 1 mono, balanced
Connectors ..................................... (1) 3.5 mm captive screw connector, 3 pole
Impedance ..................................... <150 ohms balanced
Maximum level (Hi-Z) ................ >+25 dBu, balanced at 1% THD+N
Maximum level (600 ohm) .......... >+20 dBu, balanced at 1% THD+N
Control/remote — preamp
Contact closure .............................. (1) 3.5 mm captive screw connector, 3 pole
Contact closure pin configurations 1 = 10 VDC reference voltage
Extron remote key pad control ... (1) 3.5 mm captive screw connector, 3 pole
MLP 101 Series • Specifications, Part Numbers, and Accessories
A-2
0.03% when input is -48 dBV and output
is +4 dBu.
0.14% when input is -60 dBV and output
is -10 dBV.
with a 10 Hz to 80 kHz bandwidth filter)
80 kHz bandwidth filter)
2 = variable voltage input for remote
volume control/muting
3 = ground
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external,
Power input requirements ........... 12 VDC, 0.3 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
Rack mount
MLP 101 .............................. Yes, with optional 1U rack shelf,
MLP 101 AAP ..................... Yes, with optional faceplate or frame
MLP 101 D .......................... No, but wall or furniture mountable in a
Enclosure type .............................. Metal
Enclosure dimensions
MLP 101 .............................. 1.7" H x 2.2" W x 3.0" D
MLP 101 AAP
Faceplate ..................... 1.4" H x 3.5" W x 0.1" D
Device ........................ 1.1" H x 2.75" W x 1.8" D
MLP 101 D
Faceplate ..................... 2.6" H* x 1.3" W x 0.1" D
Device ........................ 2.75" H x 1.1" W x 1.8" D
Product weight .............................. 0.3 lbs (0.1 kg)
MLP 101 Series • Specifications, Part Numbers, and Accessories
autoswitchable; to 12 VDC, 1 A, regulated
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
part #60-190-01 or 60-604-01; or
VersaTools® rack shelf, part #60-190-20 or
60-604-20; or back of the rack mount kit,
70-367-01. It is also furniture-mountable
with optional under-desk mounting kit
#70-212-01, or it can be attached to a
projector mount with optional kit
#70-217-01.
Decora-style opening
(1U high, one-eighth rack wide)
4.3 cm H x 5.6 cm W x 7.6 cm D
(Depth excludes connectors.)
(3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
(2.8 cm H x 7.0 cm W x 4.6 cm D)
(Depth excludes connectors.)
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora
faceplate. *Height is 3.8" [9.7 cm]
including mounting tabs.)
(7.0 cm H x 2.8 cm W x 4.6 cm D)
(Depth excludes connectors.)
A-3