Architectural Installation, cont'd
•
If the MLP 101 AAP or MLP 101 D are being installed in
a two- or four-gang AAP plate, attach the wall box to the
wall stud or furniture with nails or screws, leaving the
front edge flush with the outer wall or furniture surface.
See the illustration below, which applies to one-, two-,
three-, and four-gang wall boxes.
Wall Stud
Installation Cable
Cable Clamp
Screws or Nails
•
If attaching the wall box to wood, use four #8 or #10
screws or 10-penny nails. A minimum of 1/2 inch (1.3
cm) of screw threads must penetrate the wood.
•
If attaching the wall box to metal studs or furniture, use
four #8 or #10 self-tapping sheet metal screws or machine
bolts with matching nuts.
5-4
MLP 101 Series • Architectural Installation
Wall Stud
Installation Cable
Cable Clamp
Screws or Nails
MLP 101 Series
A
A ppendix A
Specifications, Part Numbers,
and Accessories
Specifications
Included.Parts.
Optional.Accessories