Wsd Print Setup - Olivetti d-COPIA3003MF Operation Manual

Network Setting: a b
1
********************* TCP/IP Settings
2
NetWare
3
AppleTalk
WSD-SCAN
1
Off
2 *On
*********************

WSD Print Setup

Select whether or not to use WSD Print. The default setting is On.
Use the procedure below to setup the WSD-PRINT setting. The machine must be restarted after the setting is
changed.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
********************* System
Login User Name:
*******************
Login Password:
System:
1
Network Setting
*********************
2
I/F Block Set.
3
Security Level
4
[ Exit ]
5
6
a b
7
8
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
8-130
Press the OK key. The Network Setting menu appears.
Press the or key to select [WSD-SCAN].
Press the OK key. The WSD-SCAN menu appears.
Press the or key to select [On] or [Off].
Press the OK key. Completed. is displayed and the
screen returns to the Network Settings menu.
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System menu appears.
Press the or key to select [Network Setting].
Default Setting (System Menu)
or key to