Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Immediately *
Subsequently
Alert Only
Use the procedure below to apply the restriction limit.
Sys. Menu/Count.: a b
4
User/Job Account
*********************
5
User Property
6
Common Settings
Login User Name:
*******************
Login Password:
User/Job Account:a b
1
User Login Set.
2
*********************
Job Account.Set.
3
Unknown ID Job
Job Account.Set.:a b
4
Each Job Account
5
Account. List
6
Default Setting
*********************
Item
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the
subsequent job will be rejected.
Job continues while displaying an alert message.
*
The next job will be prohibited in sending or in storing in the box.
[ Exit
L b
[ Login
[ Exit
[ Exit
Description
1
Press the System Menu/Counter key on the main unit
operation panel.
2
Press the
]
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE:
The User/Job Account menu appears.Refer to
]
Character Entry Method on Appendix-5 for details on
entering characters.
3
The User/Job Account menu appears.
4
Press the
]
5
Press the OK key. The Job Account. Set. menu appears.
]
11-26
or
key to select [User/Job Account].
or
key to select [Job Account. Set.].
Management