Table of Contents
Advertisement
Function Defaults
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as defaults
makes subsequent jobs easier.
Color Selection
Select the default color mode setting. The available default settings are shown below.
Full Color
Grayscale
Black & White
Use the procedure below to select the default color mode setting.
Sys. Menu/Count.: a b
3
System
4
User/Job Account
5
Common Settings
*********************
Common Settings: a b
1
Language
*********************
2
Default Screen
3
Sound
Function Default: a b
1
Color Selection
*********************
2
Scan Resolution
3
FAX Resolution
Color Selection: a b
1 *Full Color
*********************
2
Grayscale
3
Black & White
Color mode
Scan document in full color.
Scan document in grayscale for smoother
and finer finish.
Scan document in black and white.
[ Exit
]
[ Exit
]
[ Exit
]
Description
1
In the Sys. Menu/Count. menu, press the
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
3
Press the
or
key to select [Function Default].
4
Press the OK key. The Function Default menu appears.
5
Press the
or
key to select [Color Selection].
6
Press the OK key. Color Selection appears.
8-43
Default Setting (System Menu)
or
key to
8
Hide quick links:
Advertisement
Chapters
Table of Contents
