Cable-Clone Transferring Data - Alinco DJ-X11 Instruction Manual

12. Cable-clone and PC Connection Functions

12-3 Cable-Clone Transferring Data

The procedure below does not necessitate using the PC Connection function.
Turn OFF the Master and connect the stereo mini-plug
1
cable to its earphone jack.
While holding down the ［ MONI ］ key, press the
2
［ POWER ］ key to turn ON the Master.
"CLONE" appears on the LCD and the Master enters Clone mode.
While "CLONE" is displayed
3
on the LCD, press the dial. The
LCD shows something like the
fi gure on the right and the data
on the Master is transferred to
the Slave.
W h e n t h e d a t a t r a n s f e r
4
finishes,"FINISH!!"appears on
the LCD.
If "ERROR" appears on the LCD, repeat the
procedure from step 1.
Turn OFF the Master.
5
The Clone mode is not canceled unless you turn OFF the Master.
12
100
The number increases.
CLONE 57600bps
writing...
＊＊＊＊＊＊
CLONE 57600bps
FINISH!!