Selecting The Band To Operate; Mono-Band Operation - Alinco DJ-X11 Instruction Manual

5. Basic Operation

5-7 Selecting the Band to Operate

Select either the main band or sub band to operate.
Refer to (P. 33) for the range of the receivable frequencies for each band.
Press the
1
select the band to operate.
When the dual-band display is selected,
the frequency of the selected band is
displayed in larger letters. When the
5
mono-band display is selected, only
the frequency of the selected band is
displayed.
Pressing the
2
again changes the band.
MEMO

5-7-1 Mono-band operation

● Using the main band with mono-band operation
Hold down the
1
one second).
The main band is displayed with the
mono-band display. To return to the dual-
band display, repeat the same operation
again.
● Using the sub band with mono-band operation
Hold down the
1
one second).
The sub band is displayed with the mono-
band display.
To return to the dual-band display, repeat
the same operation again.
28
key or
• By holding down the
change the band quickly.
• indicates that the main band is currently selected for operation;
indicates that the sub band is currently selected for operation.
key to
key or key
key and rotating the upper dial, you can
key (approx.
key (approx.
145.000
VFO
433.000
VFO
145.000
VFO
433.000
VFO
145.000
VFO
433.000
VFO
B S
F M
F M
B S
F M
F M
B S
F M
B S
F M