Remote Controller Setting - Alinco DJ-X11 Instruction Manual

10-8 Remote Controller Setting

This menu is available only when the optional remote controller EDS-12 is used.
You can assign the functions listed in the table below to the remote controller keys
as desired. The remote controller has four keys for function assignment: A through D.
Select <EDS-12 KEY> from the
1
Set mode menu.
Press the
2
<EDS-12 KEY> sub menu.
Rotate the upper dial to select from "EDS-12 A button"
3
to "EDS-12 D button".
Rotate the lower dial to select the function assigned to
4
the [A] to [D] key.
Initial
assignment
KEY A
KEY B
KEY C
KEY D
*This function selects whether to switch to the DJ-X11 automatically when
the squelch opens, or to manualy switch the audio input from the portable
audio player.
key to display the
Menu name
Active band
Band change
Freq. up Holding down the key (approx. 2 seconds) starts scanning.
Freq. down Holding down the key (approx. 2 seconds) starts scanning.
Select input * The setting is switched every time the key is pressed (P. 103).
MONI key
V/P/M key
Volume up
Volume down
Sql. level up
Sql. level down
Attenuator
Antenna
Bar antenna
Priority
RF gain
AF tone
Beep
Bell
CTCSS
CTCSS reverse
DCS
10. Set Mode Confi gurations
145.000
VFO
< >
EDS-12 KEY
Function
B S
F M
10
95