Martin MAC 2000 Wash User Manual page 25

3 Remove the top cover of the fixture using a flathead screwdriver to unlock the four quarter-turn screws.
4 Remove the two screws holding the color wheel module in place using a Philips screwdriver. Disconnect the
cables and lift the whole module out of the fixture.
5 Remove color wheel 2 using a Philips screwdriver.
6 Attach the dimmer wheel in place of the color wheel. Ensure that the indexing magnet on the wheel rim is
aligned with the sensor on the color wheel module.
The dimmer wheel will be automatically detected when the MAC 2000 Wash is powered on and/or reset.
When the dimmer wheel is installed, the DMX channel 2 (Intensity) must be maintained at 100%.
P
T O
P
T O
Optics
29 / 28 10
Cable connections
25