Idle Screen - Aastra 6757i User Manual

If your phone did not successfully connect to the network, the "Network Disconnected" prompt appears on the display
and the telephone status light turns on.
Check that the cables are tightly connected to the phone and to the wall jack. The phone should automatically detect
when it is reconnected and displays the "Network Connected" prompt for a few seconds. However, if changes have been
made to your phone's network settings, you may need to restart your phone.
For more information about connecting your phone, see the Aastra 6757i IP Phone Installation Guide, the section "Con-
necting to the Network and to Power".
Check with your system or network administrator for assistance.
Note:
If the phone displays "No Service" you can still use the phone but it is not registered with the Registrar. For more infor-
mation about registering your phone, see your System Administrator.

Idle Screen

When the phone has successfully updated the configuration and connected to the network, the phone displays the Idle
State screen. The idle screen is shown whenever your phone is not in use.
Note:
Your System Administrator sets up your SIP screen name, line number, and any other administrative features required.
If your name does not display on the screen, contact your System Administrator.
The Idle State screen lists your name (SIP screen name) and day, date, and time. In the above screen, the "L1" indicates
John Smith is configured on Line 1.
41-001385-00 Rev 01 – 06.2013
Services Icom
Dir
Callers
John Smith
L1
Network Disconnected
Sat Jan 1 12:18am
Services Icom
Dir
Callers
John Smith
L1
Sat Jan 1 12:18am
Getting Started
6