Basic Wireless Settings - Planet WNAP-6300 User Manual

3.8 Basic Wireless Settings

Open "Basic Settings" in "Wireless" as below to make basic wireless configuration.
Disable Wireless LAN Interface
Check this option to disable WLAN interface, then the wireless module of WNAP-6300 will stop
working and no wireless device can connect to it.
Wireless Mode
Four operating modes are available on WNAP-6300.
Wireless Client: The WNAP-6300 is able to connect to the AP and thus join the wireless
network around it.
AP: The WNAP-6300 establishes a wireless coverage and receives connectivity from other
wireless devices.
Bridge: The WNAP-6300 establishes wireless connectivity with other APs by keying in remote
MAC address. Please refer to the "WDS Setting" for detailed configuration.
AP+Bridge: The WNAP-6300 servers as AP and Bridge concurrently.
WNAP-6300 can provide connectivity services for CPEs under WDS mode.
Wireless Network Name (SSID)
This wireless network name is shared among all associated devices in your wireless network.
Chapter 3 Basic Settings
Figure 15 Basic Wireless Settings
In other words, the
Page 28