Figure 7 Complete Set - Planet WNAP-6300 User Manual

5. Plug the other side of the Ethernet cable as shown in Step 3 into the PoE port of the PoE injector
and get the complete set ready.
Note:
Be reminded, the UTP wire distance toward your WNAP-6300 to the Ethernet devices,
such as Ethernet Switch, is 100 meters, this passive POE injector can be in any point
of this 100 meters UTP distance where there is a shell or protected location for this
POE injector.
Warning:
The POE injector is with one POE port and one LAN port, NEVER connect the POE
port to any other Ethernet device besides WNAP-6300 while this injector is powered,
this will damage the connected Ethernet device.
Chapter 2 Hardware Installation

Figure 7 Complete Set

Page 9