Ping Watch Dog - Planet WNAP-6300 User Manual

Remote Syslog Server
Enable Remote Syslog: Enable System log to alert remote server.
IP Address: Specify the IP address of the remote server.
Port: Specify the port number of the remote server.

5.8 Ping Watch Dog

If you mess your connection up and cut off your ability the log in to the unit, the ping watchdog has a
chance to reboot due to loss of connectivity.
Ping Watchdog
Enable Ping Watchdog: To activate ping watchdog, check this checkbox.
IP Address to Ping: Specify the IP address of the remote unit to ping.
Ping Interval: Specify the interval time to ping the remote unit.
Startup Delay: Specify the startup delay time to prevent reboot before the WNAP-6300 is fully
initialized.
Failure Count To Reboot: If the ping timeout packets reached the value, the WNAP-6300 will
reboot automatically.
Chapter 5 Management Page 46