®
ProJet
x60 Series User Guide
5.3 Change Print Head
If the Printer Status dialog indicates a print head needs changing, follow the steps below.
1. Open the printer top cover.
2. On the printer's LCD menu, select
the Fast Axis out over the Build Bed.
3. If the piston is not already lowered some distance into the build box, lower it now by selecting
. The piston will lower a short distance. To lower it further, select
PISTON
4. Open the carriage cover by releasing the latch.
5. Lift print head out of its slot and properly recycle or dispose of the empty cartridge.
On a ProJet 260C, ALSO remove the other printhead even if it does not need replacing.
3dscentral.3dsystems.com
5/12/13
PRINT HEAD
then
CHANGE PRINT HEAD
33
Additional Operations
. The Printer moves
LOWER
again.
LOWER PISTON
All Rights Reserved