3D Systems ProJet x60 Series User Manual page 2

®
ProJet x60Pro Series User Guide
Notices
Copyright and Trademarks
Copyright © 3D Systems, Inc. 2013. All rights reserved. The information in this document may not be dupli-
cated or transmitted in any way without the express written consent of 3D Systems, Inc. The information
contained herein is for the use of 3D Systems, Inc. customers, who are permitted to create brief excerpts
for the purposes of training and review. This information may not be cop[ied or incorporated in any com-
mercial programs, books, databases, or in any kind of software without the consent of 3D Systems, Inc.
3D Systems, ProJet, VisiJet and the 3D Systems logo are registered trademarks of 3D Systems Inc.
™
3DPrint 1.0 System Software Copyright © 1996-2013 3D Systems, Inc.This software is based in part on
the work of the Independent JPEG Group.
PNG library libpng version 1.2.2 Copyright © 1998-2002 Glenn Randers-Pehrson, (Version 0.96 Copyright
© 1996, 1997 Andreas Dilger), (Version 0.88 Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
ZLIB general purpose compression library version 1.1.4, Copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
Microsoft Windows is a registered trademark of Microsoft Corporation.
3D Systems acknowledges the trademarks of other organizations for their respective products or services
mentioned in this documentation.
FULL WARRANTY STATEMENT
The full warranty statement for 3D Systems products is found on our 3DS Central web site:
3dscentral.3dsystems.com.
FCC Notice
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes or modifications not expressly approved by 3D Systems could void your authority to operate this
equipment.
Limitations of Warranty and Liability
This information is provided by 3D Systems for the convenience of its customers. It is believed to be reli-
able, but NO REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF ANY KIND ARE MADE AS
TO ITS ACCURACY, FITNESS FOR A PARTICULAR USE, OR THE RESULTS TO BE OBTAINED
THEREFROM. The information is based in whole or in large part on laboratory work and does not neces-
sarily indicate performance in all conditions. Notwithstanding any information provided by 3D Systems or
its affiliates, the customer remains fully responsible for determining which federal, state, or local laws or
regulations, or industry practices are relevant to activities in which it engages, as well as assuring that
those laws, regulations, or standards are complied with under actual operating conditions, and 3D Sys-
tems undertakes no responsibility in these areas.
IN NO EVENT WILL 3D Systems BE RESPONSIBLE FOR DAMAGES OF ANY NATURE, INCLUDING
SPECIAL OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OF OR RELIANCE UPON
THIS INFORMATION. THE CUSTOMER ASSUMES ALL RISK RESULTING FROM THE USE OF THIS
INFORMATION. Customers use of the materials that follow is an acknowledgment of its agreement to the
i All Rights Reserved
5/12/13