Installing The Scanner Application - Fujitsu fi-5900C Getting Started

3. When using the SCSI cable, set the SCSI ID
using the SCSI ID switch on the back of the
scanner.
(Refer to step 3 in
on page 5.)
4. Press the "I" side of the main power switch to
turn on the scanner.
VRS (VirtualReScan®) is the image process-
HINT
ing software manufactured by Kofax Image
Products, Inc.
It enables to correct image defects, such as
document skew when scanned by the scan-
ner, or "jitter" generated by colors or half-tone
dot meshing, and so on.
You need to install the software in the VRS
Installation CD enclosed with this scanner.
For how to use the VRS, refer to the User's
Guide attached to the VRS Installation CD.
2.3 Installing the Scanner
Application
To scan documents with this scanner, you must install a
scanner driver for operating the scanner as well as scanning
software (hereinafter called the "application") for launching
the driver and performing a scan.
The scanner drivers and application provided with the scanner
are as follows:
• Scanner Driver:
FUJITSU TWAIN 32 (
FUJITSU ISIS (
• Scanning application:
ScandAll PRO ( page 10)
(Supports both FUJITSU TWAIN 32 and ISIS)
Install either of the scanner drivers above and ScandAll PRO.
Be sure to install a scanner driver, FUJITSU
ATTENTION
TWAIN 32 or FUJITSU ISIS for using VRS
Image Processing Options, also.
Installing any one of the scanner drivers
will also install "Software Operation
Panel," which is needed to change the
scanner settings.
6
"Connecting the SCSI interface"
OFF ON
page 6)
page 8)
In addition, this scanner is bundled with the following
software applications. To make full use of the scanner,
try to use them together.
•
Error Recovery Guide (
When errors occur in the scanner, you can view
information about what happened to the scanner and
how to solve the problem on the screen of the
personal computer.
•
QuickScan Pro™ <Trial Version> (
This application complies with the ISIS standard and
it is used for scanning images. This scanner is
accompanied with a trial version of this application.
•
Adobe Acrobat (
This is an industry-standard application used for
creating, managing, and making use of digitalized
documents in PDF format.
How to install drivers and applications is described below.
For FUJITSU TWAIN32 Scanner Driver
FUJITSU TWAIN 32 is a TWAIN-compliant scanner driver.
To use this scanner with any TWAIN-compatible application,
install FUJITSU TWAIN 32, following the procedure below.
■ Preparation
Do the following before installing the application:
•
Unpack the Setup CD-ROM, but do not insert
the Setup CD-ROM into the CD drive yet.
•
Connect the scanner correctly to your computer.
For details on how to connect the scanner,
HINT
refer to "2.2 Connecting the Scanner to Your
PC" on page
• Uninstall any older versions of the FUJITSU
TWAIN32 if they are already installed on
your computer.
Uninstall [Scanner Utility for Microsoft Win-
ATTENTION
dows] from [Add/Remove Programs] on
the control panel.
■ Installing the FUJITSU TWAIN32
Scanner Driver
Screenshots taken in Windows XP are used
HINT
as examples. The displayed windows and
operations may slightly vary depending on
the operating system you are using.
page 10)
page 10)
page 11)
4.